PP Material L and R family arm parts mould details
|ITEM||Arm parts family mould|
|Gate way||Cold runner (sub-gate)|
|Advice machine||250Ton normal injection machine|
|1st. Sample time||55 days needed after confirmed mould design file|
|Steel||718H, C50 (Advice choose H13 steel will be much more better)|
|Payment way||40% DP by T/T before make design, 60% blanace paid by T/T after confrimed sample (before arrange shipment)|
About make mould
Pls check this photo shown make mould normal step then can be know clearly
About mould packing
OSKAI Mould factory will spray enough antrust agent on core and cavity plate surface, then brush enough gas and butter mixed for mould surface in order to refuse rust.
After that will used PE film covered whole set of mould, then packing into wooden case.
About mould cavity and core plate
Core plate choose 718H steel
Core mould base choose C50 steel
Cavity plate choose 718H steel
Cavity plate designed with angle pins
About test mould
OSKAI mould factory test this family mould on 250Ton injection machine, it can work full automatic by ejectors system. The cycle time will be longer time normal mould as take with thick thickness for the arms.
Test mould shown on the machine
Can be choose different color for final sample
If need more infomration about this type of arm parts mould, pls contact with us, every mould can be customizable, and min order should be 1 set. tks!If you have any interest in our pp material l and r family arm parts mould can be customizable and work full automatic, welcome to contact our factory for more details. As one of the leading manufacturers and suppliers in China, we also welcome the customized orders.every mould can be customizable, and min order should be 1 setLeft and right Arm parts family mould work full automatic