lindazou@188.com +86-13586005286
ABS Helmet Jaw Plastic Injection Moulding

ABS Helmet Jaw Plastic Injection Moulding

This helmet lower jaw part mold can work automatic, and arrange rough texture treatment for the surface.
OSKAI mould factory is one of the injection mould maker from china, we are not very big, but always we do the best for something we can. For the full face helmet on normal need design few sets small parts molds then can be complete fixed.

Description

                                       ABS material helmet lower jaw  injection mould
OSKAI mould factory made different type of full face / half face helmet molds during those years, we can design it along, and can offer free design service after confrimed order. Complete design for whole parts oskai mould factory can help client finish and offer good idea always.


Lower jaw mold rough information shown
ItemLower jaw mold
Steel718H, C50
Cavity No.Single
Advice machine160Ton normal injection molding machine
1st. Sample timeFinish whole parts molds on normal need about 55 days, if only make 1 set of this type of small part mold only need about 40 days then enough
Advice Payment40% DP by T/T then begin design, 60% Blanace should be paid by T/T after confrimed samples, will offer twice samples to checking for free


Some more information shown for this jaw mold as flow
IMG_0178.jpg

Here is lower jaw mold core plate

OSKAI mould factory designed 2 small sliders for this jaw mold ear area, in order to make sure after moulding and doff, whole part fell prefect and easy take off. the small sliders now oskai mould factory design take move by oil cylinders, that will be safe way, just need longer time for moulding.

Oskai mould factory will arrange good polish for this core plate in order to make sure doff system work smooth.


IMG_0176.jpg

Here is lower jaw mold cavity plate

OSKAI mould factory designed fill material from 2 gates in order to make sure running well and fill even on time;

Oskai mould factory at final arrange rough texture for this cavity plate, this texture can be made depend on different demands;

Oskai mould factory arrange cooling enough design for jaw mold cavity in order to short cycle time for this jaw mold.


IMG_0187.jpg

Core plate details shown


IMG_0186.jpg

Cavity plate details shown



OSKAI mould factory is one of the injection mould maker from china, we are not very big, but always we do the best for something we can. For the full face helmet on normal need design few sets small parts molds then can be compelete fixed.


IMG_0174.jpgThis is the other one set of small parts mold for the full face helmet mold, as on normal each compeleted full face helmet inclueding 15-22 different parts, consider save cost for client, oskai mould will advice client accept some nealry weight & nearly issule line parts designed into 1 set mold, that can save cost for the mold and save time for producton...



If need more information about this type of injection moulds, welcome your calling or chatting message. tks!

If you have any interest in our abs helmet jaw plastic injection moulding, welcome to contact our factory for more details. As one of the leading manufacturers and suppliers in China, we also welcome the customized orders.OSKAI mould factory is one of the injection mould maker from china, we are not very big, but always we do the best for something we can. For the full face helmet on normal need design few sets small parts molds then can be complete fixed.
Hot Tags: abs helmet jaw plastic injection moulding, China, factory, manufacturers, suppliers, customized

Send Inquiry