PS Socks High Polish Full automatic Hanger Injection Family Mould
Socks hanger family mould
550x450mm / advice choose 250Ton injection machine
2 + 2 cavities
2344 steel, the original hardness is HRC33 degree
Mold steel treatment way
At final arranged hardness treatment for the core and cavity plates to HRC45 degree by vacuum quenching treatment
Mold gate way
Mold cycle time
1st. Test mold time
50 days after confirmed mold drawing files
Mold doff way
PET film covered then packing into standard wooden case
-If this hanger mould can work full automatic or not?
Yes, sure. Must 100% work full automatic. but the runner will connect with hangers after take out from mould.
-If this hanger mould can designed much more cavities?
Yes, can be. always depend on client’s QTY. demands.
-If this mould easy fill material and will get air vent or not?
Easy fill material as big gate designed, and we already made air vent on the mould then no problem for air vent.
-If this hanger mould easy get flash or not?
Not easy, as we make all ejectors holes by slow wire line cutting always. And PS material always not easy get flash.
1) We can repair the mould in one year for some free and provide technology. .
2) Gurantee period is 12months starting from the date of moulds accept in the Buyer’s factory.
3) If the moulds happen the big problem, The moulds cannot repaired, the Buyer cannot solve the problems,eg, mould crack, product can’t moulding…any big problem(except the human error) due to the mould life can’t reach to guranteed shots.the Seller and Buyer's negotiate to slove the problem, the buyer can send it back to the factory to repair or If serious, the Seller have resposiblity to make new mould for the Buyer.
If you have any interest in our PS Socks High Polish Full automatic Hanger Injection Family Mould, welcome to contact our factory for more details. As one of the leading manufacturers and suppliers in China, we also welcome the customized orders.