Customizable Baby armrest chair mould details
OSKAI mould main make different type chair, table, stool moulds, OSKAI mould factory can finish them within short time and 90% success first time test.
This baby armrest chair mould spec. details like this table shown
|Item||Baby armrest chair mould|
|Steel||718 Forging For core, cavity and slider, C50 for mould base only|
|Treatment||Arrange hardness for 718 steel to HRC35 degree, at final arrange quenching for issue area|
|Cavity||Single cavity only|
|Advice machine||880Ton normal injection moulding machine|
|1st. Sample time||55 days needed after confirmed mould design with client|
-OSKAI mould factory will offer free product and mould design service for client if order moulds from us
-On normal OSKAI mould factory will asked for original sample or CAD drawing file from client, then begin to product 3d drawing design, after finish 3d drawing design, will double check size, stacking demands, thickness, weight, material with client, after all of them confirmed, on normal need 5-7 days;
-After confirmed product design, oskai mould will begin mould design at once, for chair mould, on normal need about 4 days, then oskai mould factory will offer 3d and 2d drawing for client for double check again.
-During oskai mould make mould design, sometimes need asked production environment and doff system from client, then can design out mold fix for client's workshop.
About the mould surface treatment
-OSKAI mould factory can make polish and texture for the mould surface, that is depend on market require.
-Here are some photo shown for this chair mould, this mould choose polish treatment only
About the mould doff system
-On normal will choose ejectors system for this type of chair mould doff, that can make sure 100% work full automatic
-The ejectors will take move and back by oil cylinders on normal, as that take with big enough power & safe
-Here is photo shown side of this chair mold for oil cylinder fix on mold
Armrest chair mould core and cavity photos shown
-On normal OSKAI mould factory will choose by sea for this type of mould shipment, as they are very heavy always
-When arrange shipment always oskai mould factory will offer some free spare parts for client, such as O-ring, Ejectors, Water nips, Screws and so on
-Will packed the mold into wooden case in order to protect well while long trip moving