2.1g PS Material Disposable Thin Wall Injection Spoon Mold with Fast Cycle Time and Mirror Polish


2.1g PS Material Disposable Thin Wall Injection Spoon Mold with Fast Cycle Time and Mirror Polish


2.1g PS disposable spoon mould

Mold Size

550x500mm / advice choose 250Ton machine

Mold Steel

2344 hardness steel

Mold steel treatment way

At final arranged vacuum quenching for core and cavity to 45 degree

Mold gate way

Semi hot runner

Mold uselife

1000000 shots

Mold cycle time

15 sec (test on normal injection machine shown)

1st. Test mold time

55 days after confirmed mold drawing files

Mold exported to


Mold doff way

Choose HASCO standard ejectors

OSKAI Mould is professional in thin wall cutlery moulds manufacturing. This spoon mould can work for high-speed injection machine, we designed good air vent system, 0 degree block & good cooling system. choose good spare parts and make sure work fast no problem.


1) Mould structure design

Professional designers provide you with reasonably designed mould to shorten cycle hours.

Reducing unnecessary procedure improves efficiency.

2) Mould cooling system

According to the structural characteristics of the product and the appearance of the product , We design a reasonable form of gate for mould, such as a large gate, hidden gate, fan gate, needle gate, pin point gate etc., a reasonable channel of runner design make mold temperature balance in the shortest time to improve mould precision and productivity.

3) Accessory for mould

Slide, guide pin, guide sleeve, lifter blocks and so on are taken by wear-resistant standard parts, to ensure the mould life. 

4) Deal with mould

Quenching the mold, heat treatment to improve the hardness, then Nitriding temperature is lower , the mold will no longer need to quench mold with high surface hardness and wear resistance more than HV850


1) We can repair the mould in one year for some free and provide technology. . 

2) Gurantee  period is 12months starting from the date of moulds accept in the Buyer’s factory.

3) If the moulds happen the big problem, The moulds cannot repaired, the Buyer cannot solve the problems,eg, mould crack, product  can’t moulding…any big problem(except the human error) due to the mould life can’t reach to guranteed shots.the Seller and Buyer's negotiate to slove the problem, the buyer can send it back to the factory to repair or If serious, the Seller have resposiblity to make new mould for the Buyer.

If need more information pls contact with us, we will give you reply as soon as we can.

If you have any interest in our 2.1g ps material disposable thin wall injection spoon mold with fast cycle time and mirror polish, welcome to contact our factory for more details. As one of the leading manufacturers and suppliers in China, we also welcome the customized orders.

Send Inquiry