3.6G Good Quality PS Fork Mould With Fast Cycle Time
|Item||3.6G fork injection mould|
|Fix machine||188Ton normal injection machine|
|Cycle time||15 sec / shot|
|First sample time||45 days|
Fork mould cavity plate
Fork mould core plate
As choose 718H steel, then at final need choose thur. nitrogen treatment in order to make sure long use-life, but if so, the mould whole plates looks not brightness, if possible, we advice choose hardness steel, such as H13. tks!
Spare parts photos
-We will arrange spray enough antirust agent on cavity and core plates inside, then put enough oil mix with butter outside of mould, after that covered by PE film, then hold by wooden stick, after that covered into wooden case.
-Always we will give some spare parts to client for free when arrange shipment, in order to make sure in the furture if some parts need change, they can do it easy and by themself direct.
If you have any interest in our 3.6g good quality ps fork mould with fast cycle time, welcome to contact our factory for more details. As one of the leading manufacturers and suppliers in China, we also welcome the customized orders.