HDPE Material Turnover Box Injection Mold Customized Design And Work Full Automatic

HDPE Material Turnover Box Injection Mold Customized Design And Work Full Automatic

HDPE Material turnover box injection mold customized design welcome and mould work full automatic by stripper plate, leading time 45 days is enough for first time sample


HDPE Material turnover box injection mold 

Crate mould video shown

OSKAI mould factory make crate mould customized design welcome, OSKAI mould factory can offer free design service for client, always consider design mould work full automatic, if some spec. parts can't work full automatic, we can give client advice choose robot type.

This turnover box mould choose 718 forging steel, fix for 880ton injection moulding machine


Here is test crate mould photo shown when fix on machine

Choose hot runner system for this crate mould in order to make sure fill material even and fast, work full automatic by stripper plate, the stripper plate OSKAI Mould factory designed take move by guider pins, cavity side sliders take move by oil cylinders. good cooling system designed.

Hot runner brand can be choosed by client, different brand unit price different. also can be customized brand.


here is sample photos tooked when test mold

Choose HDPE Material for this type of crate mould, color can be customized depend on market demands.

Cycle time about 55 sec. without cooling-water machine. 

Temperature Controller set about 260 degree then enough, after mould temperature rise, can be reduce a little depend on turth condition.


here are some other type design crate photo shown

About crate, there are so many different design and size, but mould design will be same same. 

Welcome your e-mail or calling to us for more information if you are interested in this type of injection moulds.


Spare parts always oskai mould will offer for free

When arrange shipment always OSKAI Mould factory will offer some free spare parts. Different mould will offered different spare parts, different QTY moulds also will offered different spare parts. 

If need more spare parts also can be discussed, some of them OSKAI mould factory will asked for lowest cost.


When moulds finish, client confirmed samples or visit us to check test moulds say ok, OSKAI mould factory will arrange moulds packing into wooden case, make sure protect good enough during transportation, all of those service will be for free.

On normal OSKAI mould factory will send the moulds to ningbo port enter stroage, but also can discussed change any port in china before place order. 

Here are some more photos for this crate mould



Hot Tags: hdpe material turnover box injection mold customized design and work full automatic, China, factory, manufacturers, suppliers, customized, whisk mold, toilet body moldds, automatic jug mold, food container lid mold, changeable logo mold, plastic knife mold

Send Inquiry