Plastic PP material 5L bucket injection moulding
OSKAI mould factory made a lot of paint bucket moulds during those years, we have rich experience on this type of injection mould design and making, welcome contact us for more information. tks!
Here are some simple details for this 5L bucket mould
Mould name | PP material 5L bucket mould |
Mould steel | 718 Forging, C50 |
Mould cavity | Single |
Mould gate way | Hot runner (point gate) |
Mould leading time | 50 days for T1 |
Mould packing way | standard wooden case |
![]() here is bucket mould core plate photo OSKAI mould factory design this bucket mould doff system by air system, the air for air gate + 4 conners ejector block, in order to design enough space for 4 sliders work take move by machine direct. The bucket mould oskai mould factory design work full automatic on 288ton machine. 1/3 Top of core choose insert for air in, then make sure when open the air won't bump off for the whole bucket. |
![]() here is bucket mould cavity plate photo OSKAI mould factory choose hot runner (point gate) for the bucket mould, no need cut off runner and also on normal will choose raw mateiral for it. Neck area choose insert, if can bear a little more expensive cost, advice choose beryllium copper will be best for cooling system. For the tapper design, on normal can choose round way and 8 conner way, that depend on client's budgeting. If wanna know more about this bucket mould, pls contact with us. tks! |
Some more photos shown for this bucket mould
![]() core | ![]() cavity |