Hight polish PP 4L Paint bucket injection mould
OSKAI mould made a lot 1L, 3L, 4L, 5L, 10L, 15L, 16L, 20L, 25L, 30L Paint bucket injection moulds, all of them can choose air doff system work full automatic.
On normal OSKAI mould factory will design 3 ways for this kind of bucket moulds, different design will take with different price offer, welcome your visit then know more about us.
This is 4L paint bucket mold details
ITEM | 4L Paint bucket mold |
Steel | 718 Forging, C50 |
Cavity | Single |
Advice machine | 300Ton |
Cycle time | 25' / shot about |
Doff system | Work full automatic by air system only |
Here are some photos and details for this bucket mold
![]() here is core plate photo OSKAI mould will make high polish for core plate, the air vent design well and won't get bump problem; Sliders work inside of mold Total 3 different zone air system designed on core plate If possible, OSKAI mould factory advice choose 1/3 core area choose beryllium bronze in order to make sure prefect cooling system for it |
![]() here is cavity plate photo Always oskai mould factory advice client choose cold runner system for this type of paint bucket mould, but if client insist on hot runner system also can be done like this, but if so need choose new material always OSKAI mould factory advice choose beryllium bronze for neck area in order to make sure prefect cooling system for it We will make high polish for cavity plate always, there are differnt design for the cavity, can choose wear plate design better |
Some more photos share for this 4L paint bucket mold at here
![]() Paint bucket mold core | ![]() Paint bucket mold cavity |
Other photos shown different design bucket mould at here
![]() Adjust design cavity | ![]() Adjust design core |
When oskai mould factory arrange shipment always will offer some free spare parts for client.
If need more video or information about this mould or this type of bucket moulds, welcome you contact with us by calling or e-mail. tks!