Plastic PC Material High Transparent Fridge Drawer Mould

Plastic PC Material High Transparent Fridge Drawer Mould


Plastic PC material high transparent fridge drawer mould


Here is Plastic PC material high transparent fridge drawer mould Sample photo shown

This PC fridge drawer mould can work full automatic no problem, but as so high transparent on normal choose take the drawer out by hands or robot.

Choose valve gate hot runner system in order to make sure fill material easy, as PC material very hard & not easy to fill if choose normal point gate.

Sliders take move by oil cylinder in order to make sure 100% safe. If have demands from gov. then also can choose other sytem instead of oil cylinder system.

In order to make sure won't get roughing mark problem, then always advice choose hard steel for this drawer mould.


here is PC fridge drawer mould cavity photo shown

The steel choose H13, at final arrange by vacuum queching treatment to HRC45 degree for whole cavity plate in order to make sure long use-life.

Arrange mirror polish for cavity side, and desgined full cooling enough water system for it in order to reduce cycle time. Advice connect each water line seperate will be much more better.

Designed many wear plate in order to adjust fix for different machine, advice choose 450Ton machine, but choose special nozzle main for PC material.


here is core plate photo shown for this drawer mold

Now our design choose oil cylinder system, can be choose other system instead of it.

About the doff system choose air gates and stripper, that will be control very well take out distance and help make sure won't get any marks when take it off.

Choose springs help stripper return back after work.

Here are some more details photos shown for cavity and core plate for drawer mould


drawer mould cavity details


drawer mould core details

How long time needed for this drawer mould?

As choose hardness steel, on normal we need 55 days for first time test mould, but the date only can begin to count after get down-payment & confrimed mould design

How about this drawer mould cost?

It is about $10,000 only, if need more details pls contact with us.

If you have any interest in our plastic pc material high transparent fridge drawer mould, welcome to contact our factory for more details. As one of the leading manufacturers and suppliers in China, we also welcome the customized orders.

Send Inquiry