Plastic PP Fast Noodle Bowl Injection Mold with Lock-lock Lid Seal Water
Fast noodle bowl mold
460x420mm / advice choose 250Ton injection machine
718H steel, the original hardness is HRC30 degree
Mold steel treatment way
During process arrange vacuum quenching treatment for core and cavity plate to HRC42-45 degree
Mold gate way
Point gate hot runner system
Mold cycle time
1st. Test mold time
45 days after confirmed mold drawing files
Mold doff way
Choose stripper + air gates
PET film covered then packing into standard wooden case
-This fast noodle bowl after fix for the lid can seal water or not?
Yes, can be. but at first must point it out, and after fix will fell tight.
-This fast noodle bowl mold can arrange mirror polish?
Yes, that can be arrange mirror polish and won’t cause air stick.
P20, 718, 2738, 2344, 2316, S136, 3Cr13, 38CrMoAl, Mov and more
1 or more (depend on client)
electroplate (in order to prevent rust), thur. nitrogen (in order to rise surface hardness), vacuum quenching (in order to rise whole hardness)
PP, PVC, PPR, ABS, PA, PC, POM, PS, PET, HDPE, LDPE and other
UG, PRO-E, MOLDFLOW, CAD, CAE, VISI
Mold gate way
cold runner/hot runner/semi-hot runner
HASCO, DME, LKM, HOME-MADE
Mold doff system
ejectors, off-plate, air valves, hydraulic jars, air jars, air ejectors, oil-motor and more
Water cooling/air cooling/beryllium bronze cooling
50% down payment by T/T, 50% balance by T/T before shipment
packed into standard wooden cases
most reasonable as rich experience
1) Mould structure design
Professional designers provide you with reasonably designed mould to shorten cycle hours.
Reducing unnecessary procedure improves efficiency.
2) Mould cooling system
According to the structural characteristics of the product and the appearance of the product , We design a reasonable form of gate for mould, such as a large gate, hidden gate, fan gate, needle gate, pin point gate etc., a reasonable channel of runner design make mold temperature balance in the shortest time to improve mould precision and productivity.
3) Accessory for mould
Slide, guide pin, guide sleeve, lifter blocks and so on are taken by wear-resistant standard parts, to ensure the mould life.
4) Deal with mould
Quenching the mold, heat treatment to improve the hardness, then Nitriding temperature is lower , the mold will no longer need to quench mold with high surface hardness and wear resistance more than HV850
1) We can repair the mould in one year for some free and provide technology. .
2) Gurantee period is 12months starting from the date of moulds accept in the Buyer’s factory.
3) If the moulds happen the big problem, The moulds cannot repaired, the Buyer cannot solve the problems,eg, mould crack, product can’t moulding…any big problem(except the human error) due to the mould life can’t reach to guranteed shots.the Seller and Buyer's negotiate to slove the problem, the buyer can send it back to the factory to repair or If serious, the Seller have resposiblity to make new mould for the Buyer.
If you have any interest in our Plastic PP Fast Noodle Bowl Injection Mold with Lock-lock Lid Seal Water, welcome to contact our factory for more details. As one of the leading manufacturers and suppliers in China, we also welcome the customized orders.