High transparent PS Material cream box injection mould
OSKAI mould main make commodity products injection moulds since 2015 year.
OSKAI mould will offer free design service and free 1 time samples by TNT to check.
OSKAI Mould factory make sure every set moulds will arrange test by right spec. injection machine and take video shown all set details.
This cream box mould choose full hot runner system, point gates and local brand, the hot runner brand can be choosed by buyer, different brands price different. Also OSKAI mould factory can accept buyer send hot runner system to us.
Some more details shown for this cream box mould like this list
Mould item | High treansparent cream box injection mould |
Mould cavity | 6 |
Moulding machine | 250 Ton normal injection moulding machine |
Gate way | Full hot runner system |
Cycle time | 28' / shot about |
T1 leading time | 55 days |

This is sample photo shown for this cream box mould which test out from 250Ton injection machine
OSKAI mould factory will arrange at least 2 times test mould in china, on normal oskai mould factory moulds T1 90% will be ok.
When arrange T1 test, without cooling system only check doff system and products, T2 will connect full cooling system (but normal temperature water)
Everytime test mould oskai mould will contact buyer on video or mail share test mould video and test mould report.
All demands can be discussed before process.
This photo shown some pare parts (free) oskai mould will offer when arrange shipment
OSKAI mould factory will offer some free spare parts (spring, ejectors, mould foot screws, heaters, crads and so on) depend on mould QTY. and exact needed
If has demands on spare parts, also can be discussed before place order.
All the spare parts will be offered together with moulds shipment, on normal put into temperature controller wooden boxes.

Photos shown this cream box mould core plate


Photos shown this cream box mould cavity plate


Photos shown for moulds spare parts


Temperaure controller cards


Hot runner heaters
OSKAI MOULD FACTORY WILL CHOOSE FLY CUTTING TREATMENT FOR THE MOULDS SURFACE ON NORMAL, IF HAS DEMANDS ALSO CAN CHOOSE PAINT SPRAYING. FOR THE WATER NIPDS ALSO ON NORMAL WILL CHOOSE FAST CONNECT WATER NIPS, IF HAS DEMANDS CAN CHOOSE BSP TYPE.