PP material 90l oval bath moulding
OSKAI mould factory made a lot of this type bath mould, also we can make foldable bath mould. welcome your inquriy to discuss more about bath moulds.
This oval bath mold work full automatic by center ejector + air system, choose hot runner system to make sure fill PP material easy, thickness design about 2mm also strong enough.
Oval bath mould details like this table shown
MOLD ITEM | 90L OVAL BATH MOLD |
MOLD STEEL | P20 Forging & C50 steel plate |
Gate way | 3 gates by hot runner system |
1st. SAMPLE TIME | Within 55 days needed after confrimed mold design file |
Mould Packing way | By plywood case |
Advice Machine | 880Ton normal type injection moulding machine |
On normal so big bath mold take off by human or robot will be better, as that is too big & heavy, if doff automatic from mould direct easy get scratch.
OSKAI mould factory can advice good robot maker to fetch bath from mould if needed. then reduce cycle time and make sure protect bath good enough.
More Photos shown for this oval bath mould
If want to know more about this type of injection molds, welcome your inqury mail or calling, we will give you more details which you want to know.